CR-SE Series Ethernet Radio Modems

Ethernet Radio Solution
AUTOMATIONDIRECT’s CR-SE series Ethernet radios are based on the same patented Cirronet radio technology as the CR-HN serial radios. These are low cost, 2.4 GHz frequency-hopping spread spectrum wireless data modems. They provide long range, high-speed wireless connectivity among Ethernet devices in industrial settings.

• CR-SE radios provide long range, high-speed wireless connectivity among Ethernet devices in industrial settings.
  
  
• The CR-SE Ethernet radios have exceptional multipath fade rejection as well as immunity to jamming.
  
  
• Typical CR-SE applications include wireless industrial automation and data collection, network bridging, PLC networking and SCADA.
  
  
• CR-SE radios can function as a high speed bridge to a distant Ethernet network node or a CR-SE radio base station can be connected to multiple remote CR-SE radios to build a wireless Ethernet network.
  
  
• The higher gain antennas increase the range up to 5-plus miles. All CR-SE models enable long range connectivity far beyond cabled Ethernet maximums.
  
  

Four Wireless Modem Models Available

• CR-SEB - 10/100 Base-T Ethernet radio bridge, 460Kbps with 2dB, Rt Angle, Omni antenna
  
  
• CR-SEBX - 10/100 Base-T Ethernet radio bridge, 460Kbps with external antenna connector
  
  
• CR-SEH - High-speed, 10/100 Base-T Ethernet radio bridge, 1.23Mbps with 2dB, Rt. angle, Omni antenna
  
  
• CR-SEHX - High-speed, 10/100 Base-T Ethernet radio bridge, 1.23Mbps with external antenna connector
  
  

• CR-SEAP - Serial to Ethernet Access Point, enables serial devices on CR-HN radios to appear as nodes on an Ethernet network, 10/100 Base-T, 460Kbps with integral antenna
  
  

CR-SE Series Ethernet Radio Modems are priced from $1,195.00