Double-level Terminal Blocks and Accessories

Double-Level Terminal Blocks and Accessories

Models include:

• Feed-through terminal blocks
  Double-level terminal blocks offer twice the wiring density of feed-through blocks. The DN-D10 is a straight feed-through block. The DN-D10X version is supplied with an internal jumper to common all four of its connection points. Standard models come in a variety of colors.
  
  
• LED terminal blocks
  These terminal blocks provide built-in LED indicators. The LED illuminates when voltage is present. The LED1 version is for 24V AC/DC circuits, and includes current-limiting elements.
  
  
• Diode terminal blocks
  Typically, an inductive load produces a spike (neg.-going) when it is turned off. These terminal blocks with built-in clamping diodes help protect your PLC’s output circuits. The circuit below shows the normal voltages to the load (during on state).

General features include:

• Standard models are available in a variety of colors including: gray, blue, black, green, orange, red, and yellow. (LED and Diode models available in gray only )
• Virtually vibration-proof clamping system
• Internal jumpers
• Protective moldings
• Funneled wire entry
• Wire stops
• Snap-on solid foot
• Captive screws
• Zinc dichromate-plated, hardened steel screws and clamps
• Nickel-plated, copper current bar
• Marking system

Accessories

Double-level terminal block accessories include:

• Rails
• End brackets
• End covers
• Angled support brackets
• Cover tops
• Separators
• Jumpers
• Test plugs (red or black)
• Screwdriver
• Wire cutter/stripper tool
• Marking tags and accessories
  (blank and printed tags, tag adapter, indelible marking pen, etc.)